DP Epoxy Grout PG

DP Epoxy Grout PG

Five Star® DP Epoxy Grout PG is the only pumpable, expansive, non-shrink, low exothermic epoxy grout for machinery grouting. This versatile, dual-purpose product is formulated for single, large volume placements and may be used as thin as ½ inch (13 mm) in depth. Five Star® DP Epoxy Grout PG is a three component, 100% solids, solvent-free system formulated to provide high strength and superior creep resistance combined with the highest effective bearing area. Five Star® DP Epoxy Grout PG exhibits positive expansion when tested in accordance with ASTM C 827.

Product Downloads

pdf DP Epoxy Grout PG Data Sheet (12724) Size: 551.1 KB Data Sheet
pdf DP Epoxy Grout PG Design-A-Spec Size: 448.69 KB Design-A-Spec
pdf FOCUS on Five Star DP Epoxy Grouts (12939) Size: 1.57 MB FOCUS Flyer
pdf SDS - Component A (12267) Size: 224.8 KB Safety Data Sheet
pdf SDS - Component B (12272) Size: 238.91 KB Safety Data Sheet
pdf SDS - Component C (12256) Size: 107.86 KB

Safety Data Sheet

pdf SDS - Component A (12267-01) (Spanish) Size: 161.46 KB Safety Data Sheet (Spanish)
pdf SDS - Component B (12272-01) (Spanish) Size: 201.57 KB Safety Data Sheet (Spanish)
pdf SDS - Component C (12256-01) (Spanish) Size: 103.35 KB

Safety Data Sheet (Spanish)

Product Details

Advantages
  • Pumpable
  • Permanent support for machinery requiring precision alignment
  • Low exothermic properties with early strength development
  • Long working time
  • Solvent-free clean up
  • Expansive, non-shrink per ASTM C 827
  • Superior creep resistance
  • Chemically resistant
  • 95% Effective Bearing Area (EBA) is typically achieved following proper grouting procedures
  • Excellent adhesion to steel
Uses
  • Large volume applications
  • Foundation rebuilds and skid mounted equipment
  • Precision alignment under dynamic load conditions
  • Vibration dampening for rotating equipment
  • Support of chemical tanks, vessels and rotating equipment
  • Aggressive chemical environments
  • Installation of anchors and dowels
  • Operating temperatures up to 180°F (82°C)
Yield (Cubic foot) 1.58
Yield (Liter) 44.7