Five Star Hybrid Grout - High Flowability

More Views

Hybrid Grout

Five Star® Hybrid Grout is a fusion of many key properties found in Five Star® specialty grouts. It achieves superb flowability while reaching high early and ultimate compressive strengths. Its ability to be installed over a wide temperature range (35-100°F/2-38°C) lets you extend your installation season by allowing you to grout during cold and hot weather months. Five Star Hybrid Grout reaches one of the highest effective bearing areas (EBA) in the industry with the use of Air Release Technology per ACI 351.1 R. Five Star Hybrid Grout meets the performance requirements of ASTM C 1107-02 Grades A, B and C, ASTM C 1107-14a, and CRD-C 621-93 specifications.

Product Downloads

pdf TDS Hybrid Grout (na12932eng-rJ) Size: 325.42 KB

Data Sheet

pdf SDS Hybrid Grout (na12965eng-rE) Size: 209.05 KB

Safety Data Sheet

pdf DAS Hybrid Grout (na12973eng-rD) Size: 297.9 KB


pdf FS Hybrid Grout Flyer (12984 rC) Size: 4.98 MB


pdf FAQ: Hybrid Grout Mixing Instructions (13021) Size: 1.39 MB

FAQ - Mixing Instructions

pdf Solutions: Hybrid Grout (13007) Size: 1.31 MB

Solutions | Case Study

Product Details

  • Ultra-high 1, 7, and 28 day compressive strengths
  • 95% EBA is typically achieved following proper grouting procedures
  • Highly flowable; can be pumped or poured
  • Non-shrink from time of placement
  • Nonmetallic
  • Formulated with Air Release Technology for reduced voids and increased bond
  • Can be installed over a wide temperature range (35°-100°F/2°-38°C )
  • Experienced field engineering and technical support
  • Permanent support for high-load machinery
  • Light vibratory equipment
  • Structural steel and precast concrete
  • Support for tanks, vessels, generators and small pumps
  • Wind turbines
  • Seismic applications
  • High-load rebar, anchors and dowels
  • High-load infrastructure
Yield (Cubic foot)0.39
Yield (Liter)11