Landing Pages

Five Star® LC Epoxy Grout (formerly Crane Rail Grout) is a highly flowable, non-shrink, rapid strength gain, epoxy grout for tight clearance applications and dynamic loads. It is a three-component, 100% solids epoxy system that exhibits positive expansion when tested in accordance with ASTM C 827 for precision grouting and alignment of crane rail. Five Star® LC Epoxy Grout has excellent chemical resistance.

Five Star Fluid Epoxy is a two component, all-purpose, rapid cure fluid epoxy  system. Five Star Fluid Epoxy is designed for adhesive grouting, anchoring,  repair of spalls and cracks, skid resistant surfaces and setting of bolts and  wedges.

Five Star® HP Epoxy Grout is a high-performance expansive, non-shrink, epoxy system for supporting equipment requiring precision alignment. Five Star® HP Epoxy Grout is a three component, 100% solids, solvent-free system formulated to exhibit high early strength combined with the highest creep resistance at elevated temperatures. Five Star® HP Epoxy Grout exhibits positive expansion when tested in accordance with ASTM C 827.

Five Star® DP Epoxy Grout is the only expansive, non-shrink, low exothermic epoxy system for machinery grouting. This versatile, dual purpose product is formulated for single, large volume placements and may be used as thin as 1/2 inch (13 mm) in depth. Five Star® DP Epoxy Grout is a three component, 100% solids, solvent-free system formulated to provide high-strength and superior creep resistance combined with the highest effective bearing area. Five Star® DP Epoxy Grout exhibits positive expansion when tested in accordance with ASTM C 827.

Five Star® DP Epoxy Grout PG is the only pumpable, expansive, non-shrink, low exothermic epoxy grout for machinery grouting. This versatile, dual-purpose product is formulated for single, large volume placements and may be used as thin as ½ inch (13 mm) in depth. Five Star® DP Epoxy Grout PG is a three component, 100% solids, solvent-free system formulated to provide high strength and superior creep resistance combined with the highest effective bearing area. Five Star® DP Epoxy Grout PG exhibits positive expansion when tested in accordance with ASTM C 827.

Five Star Rapid Epoxy Grout is the only expansive, nonshrink, rapid strength  gain epoxy grout designed for short turnaround precision grouting. It is a  three component, 100% solids, solvent free system formulated with superior  flowability.

Five Star® Grout is the industry’s leading cement-based, nonmetallic, non-shrink grout for supporting machinery and equipment. It is formulated with Air Release technology that combines high performance with the greatest reliability. When tested in accordance with ASTM C 827, Five Star® Grout exhibits positive expansion. Five Star® Grout meets the performance requirements of ASTM C 1107-02 Grades A, B and C, ASTM C 1107-07, and CRD-C 621-93 specifications for non-shrink grout over a wide temperature range, 40°F - 90°F (4°C - 32°C).

Five Star® High Strength Grout is the industry’s leading cement-based, non-metallic, non-shrink grout for supporting machinery and applications requiring precision alignment. It is formulated with Air Release technology that combines high performance with the greatest reliability. When tested in accordance with ASTM C 827, Five Star® High Strength Grout exhibits positive expansion and meets the performance requirements of ASTM C 1107-02 Grades A, B and C, ASTM C 1107-07, and CRD-C 621-93 specifications for non-shrink grout over a wide temperature range, 40°F - 90°F (4°C - 32°C).

Five Star® Hybrid Grout is a fusion of many key properties found in Five Star® specialty grouts. It achieves superb flowability while reaching high early and ultimate compressive strengths. Its ability to be installed over a wide temperature range (35-100°F/2-38°C) lets you extend your installation season by allowing you to grout during cold and hot weather months. Five Star Hybrid Grout reaches one of the highest effective bearing areas (EBA) in the industry with the use of Air Release Technology per ACI 351.1 R. Five Star Hybrid Grout meets the performance requirements of ASTM C 1107-02 Grades A, B and C, ASTM C 1107-14a, and CRD-C 621-93 specifications.

Videos

Cold-Weather Grouting

Mock-up Flow Video

Five Star® Fluid Grout 100 is the industry’s leading cement-based, nonmetallic, non-shrink fluid grout for supporting machinery and equipment. It is formulated with Air Release technology that combines high performance with the greatest reliability. When tested in accordance with ASTM C 827, Five Star® Fluid Grout 100 exhibits positive expansion. Five Star® Fluid Grout 100 meets the performance requirements of ASTM C 1107-02 Grades A, B and C, ASTM C 1107-07 and CRD-C 621-93 specifications for non-shrink grout over a wide temperature range, 40°F - 90°F (4°C - 32°C).

Five Star HTR Grout is a unique cement based grout for supporting equipment and structural baseplates in high temperature environments. Five Star HTR Grout can be poured into place, gains strength rapidly and can be exposed to 1000°F (538°C) in 24 hours and up to 2400°F (1316°C) after a 7-day curing procedure. Five Star HTR Grout shows positive expansion when tested in accordance with ASTM C 827. Five Star HTR Grout meets the performance requirements of ASTM C 1107-02 and CRD-C 621-93 specs for nonshrink grout grades A, B, and C.

Five Star Instant Grout is a rapid strength gain, nonmetallic, nonshrink grout for supporting machinery requiring precision alignment and quick turnaround. It is formulated with an advanced technology ideal for cold weather applications, while providing the greatest reliability, and selective chemical resistance. When tested in accordance with ASTM C 827, Five Star Instant Grout shows positive expansion. Five Star Instant Grout meets the performance requirements of ASTM C 1107-02 and CRD-C 621-93 specifications for nonshrink grout.

Five Star Structural Concrete® is a high early strength, single component, permanent concrete repair material. Five Star Structural Concrete® produces a repair which is dimensionally stable, develops an integral bond to existing concrete, and restores structural integrity within hours of placement. Application thickness can range from 1/4 inch to 12 inches (6 mm to 300 mm) in a single pour. Five Star Structural Concrete® provides increased corrosion protection of steel reinforced structures with migrating corrosion inhibitor technology and very low chloride ion permeability. Moisture sensitive coatings can be applied in 8 to 24 hours.

Five Star Structural Concrete® ES is a high early strength, single component, permanent concrete repair material which provides a 25-minute working time. The extended set facilitates deep/large volume pours up to six cubic yards in a single lift. Five Star Structural Concrete® ES produces a repair which is dimensionally stable, develops an integral bond to existing concrete, and restores structural integrity within hours of placement. Five Star Structural Concrete® ES provides increased corrosion protection of steel reinforced structures with migrating corrosion inhibitor technology and very low chloride ion permeability.