Grouts for High Temperature Zones
4 Item(s)
-
Structural Concrete HTR
Five Star Structural Concrete HTR is a unique high temperature resistant concrete repair material which can be pumped or poured into place. Five Star Structural Concrete HTR gains strength rapidly and can be exposed to 1000°F (538°C) in three hours and up to 2400°F (1316°C) after a 7-day curing procedure. -
Structural Concrete HTR Shotcrete
Five Star Structural Concrete HTR Shotcrete is a unique high temperature resistant concrete repair material which is applied by dry process shotcrete. Five Star Structural Concrete HTR Shotcrete gains strength rapidly and can be exposed to 1000°F (538°C) in three hours and up to 2400°F (1316°C) after a 7-day curing procedure. -
HTR Grout
Five Star HTR Grout is a unique cement based grout for supporting equipment and structural baseplates in high temperature environments. Five Star HTR Grout can be poured into place, gains strength rapidly and can be exposed to 1000°F (538°C) in 24 hours and up to 2400°F (1316°C) after a 7-day curing procedure. Five Star HTR Grout shows positive expansion when tested in accordance with ASTM C 827. Five Star HTR Grout meets the performance requirements of ASTM C 1107-02 and CRD-C 621-93 specs for nonshrink grout grades A, B, and C.
-
Hybrid Grout
Five Star® Hybrid Grout is a fusion of many key properties found in Five Star® specialty grouts. It achieves superb flowability while reaching high early and ultimate compressive strengths. Its ability to be installed over a wide temperature range (35-100°F/2-38°C) lets you extend your installation season by allowing you to grout during cold and hot weather months. Five Star Hybrid Grout reaches one of the highest effective bearing areas (EBA) in the industry with the use of Air Release Technology per ACI 351.1 R. Five Star Hybrid Grout meets the performance requirements of ASTM C 1107-02 Grades A, B and C, ASTM C 1107-14a, and CRD-C 621-93 specifications.
4 Item(s)
You have no items to compare.
