Adhesives and Sealants

Items 1 to 5 of 12 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Descending Direction
  1. Injection Gel

    Injection Gel

    Five Star Injection Gel is a multi-purpose, two component, 100% solids, moisture insensitive, structural epoxy adhesive used in filling cracks up to 1/2 inch (13 mm). Five Star Injection Gel is a smooth, nonabrasive gel that can be pressure injected or hand applied. Five Star Injection Gel meets ASTM C 881 Types I, II, IV and V, Grade 3, Classes B & C.
  2. Control Joint Sealer

    Control Joint Sealer

    Five Star Control Joint Sealer is a semi-rigid, moisture insensitive, self-leveling epoxy joint filler and sealer for filling horizontal control joints. It meets ASTM C881 Grade 2, Classes B & C and complies with USDA specifications for use in food processing areas.
  3. Underwater Epoxy Gel

    Underwater Epoxy Gel

    Epoxy Gel Adhesive. Five Star® Underwater Epoxy Gel is a multi-purpose, two component, 100% solids, moisture insensitive structural epoxy adhesive used in filling cracks up to 1/2 inch (13 mm). Ideal for steel, concrete, and masonry applications, Five Star® Underwater Epoxy Gel is a smooth, nonabrasive gel that can be pressure injected or hand applied. Five Star® Underwater Epoxy Gel meets ASTM C 881 Types I, II, IV and V, Grade 3, Classes B & C.

  4. Fluid Epoxy

    Fluid Epoxy

    Five Star Fluid Epoxy is a two component, all-purpose, rapid cure fluid epoxy  system. Five Star Fluid Epoxy is designed for adhesive grouting, anchoring,  repair of spalls and cracks, skid resistant surfaces and setting of bolts and  wedges.

  5. Segmental Bridge Adhesives

    Segmental Bridge Adhesives

    Five Star® Segmental Bridge Adhesive and Five Star® Segmental Bridge Adhesive LT are 100% solids, two-component structural epoxy compounds used in the installation or repair of segmental bridges and structures.

    Two versions are available for varying temperature ranges: Segmental Bridge Adhesive for 60-120°F (16-49°C), and Segmental Bridge Adhesive LT for 20-80°F (-7 - 27°C).

    The non-abrasive gels have low-creep characteristics and enhanced tensile strength. Both conform to the current ASTM C-881, Types I, IV, VI and VII, Grade-3, Class-B/C, AASHTO M-235 specifications.

Items 1 to 5 of 12 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Descending Direction
Compare Products

You have no items to compare.

Keep your eyes open for our special Back to School items and save A LOT!